Estimate as of June 2026 · Local pricing for the Scranton-Wilkes-Barre metro area
Estimate compiled from published 2026 cost guides, accessed June 2026.
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model: national estimates adjusted for Scranton's labor rates, cost of living, and material pricing.
The cost to install solar panels in Scranton ranges from $12,210 to $35,610, with most homeowners paying around $20,350. Your actual cost depends on several factors specific to your home and the Scranton-Wilkes-Barre market.
System size is the primary cost driver: residential systems range from 4kW to 12kW+ based on your energy usage, and price before incentives rises with size.
Monocrystalline panels are more efficient and more expensive per watt, while polycrystalline panels offer a lower upfront cost at slightly reduced efficiency.
Steep or complex roofs require more labor and safety equipment. If your roof needs replacement soon, doing it before solar avoids costly panel removal later.
String inverters are cheapest; microinverters cost more but optimize each panel individually and are better for partially shaded roofs.
Adding a home battery (like Tesla Powerwall) adds significantly to the total but provides backup power. The federal residential clean energy credit ended for systems installed after 2025.
The Northeast tends to have higher labor costs, partly driven by stronger union presence and higher cost of living. Stricter building codes mean more inspection requirements; budget extra for permits.
Most homeowners focus way too much on the solar panels themselves and not nearly enough on the condition of the electrical system they're tying into. I see plenty of houses where the roof is perfectly fine for solar, but the panel, service equipment, or grounding setup is what actually complicates the install.
The biggest surprise cost is usually the main service panel. Older 100A panels often don't have enough busbar capacity to safely backfeed a modern solar system under current code. That's when you start hearing terms like "line-side tap," "derating the main breaker," or "panel upgrade." A lot of solar sales reps gloss over that part during the initial quote because they want the project signed first. Then the homeowner gets hit with a change order later when the electrical review starts.
I also see a lot of issues with older panel brands. If a house still has Federal Pacific or Zinsco equipment, I'm not tying a new solar system into it. Same thing with panels showing corrosion, overheated bussing, or sloppy DIY additions over the years. Solar creates a continuous power source feeding into the system every day. The infrastructure needs to be solid before anything gets connected.
One thing the internet gets wrong constantly is the idea that "solar eliminates your electric bill." In northern and snowy climates, production swings hard between summer and winter. Long daylight hours help in June and July, but snow cover, shorter days, and low sun angle absolutely affect winter output. Good installers explain realistic annual production numbers. Bad ones sell homeowners on perfect-case scenarios they'll never actually hit.
Permitting and utility coordination also matter more than people realize. Utilities and local AHJs are paying much closer attention now to rapid shutdown requirements, labeling, disconnect placement, grounding, and load-side connections than they were a few years ago. A clean-looking install can still fail inspection instantly if the electrical details are sloppy.
When I look at solar quotes, I want to see inverter brand, panel wattage, mounting system, production estimates, and exactly how the interconnection is being handled at the main panel. If the proposal barely mentions the electrical scope, that's a problem.
And honestly, if it's my house, I'm spending more for a clean electrical installation before I spend extra on premium panels. High-end panels connected to an overloaded or outdated electrical system is backwards thinking. The solar equipment gets all the attention, but the reliability of the install usually comes down to the boring electrical infrastructure underneath it.
Solar panel installation in Scranton typically needs a permit and inspection. We have not researched Scranton's fee schedule, so ask the building department or your contractor for the current fee. Your contractor typically handles the permit process, but confirm this upfront.
Hiring a pro? Make sure they're properly licensed: see verify electrician licensing in Pennsylvania.
In cold climates, expect additional costs for heated conduit runs, insulated wire, and work scheduling around freezing temperatures. Winter installations may cost 10–15% more due to shorter workdays and weather delays.
This project requires a licensed professional in Scranton. Attempting solar panel installation without proper licensing can void insurance and create serious safety hazards.
Compare licensed, insured contractors serving Scranton-Wilkes-Barre.
Powered by Thumbtack
The average cost to install solar panels in Scranton ranges from $12,210 to $35,610, with most homeowners paying around $20,350. This estimate splits into about $6,100 for labor and $14,240 for materials (a modeled split). Costs in Scranton are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Scranton contractors to lock in the best price.
Yes, Scranton typically requires a permit for solar panel installation. Ask the building department or your contractor for the current fee. Your contractor typically handles the permit application. Working without a required permit can void warranties and create problems when selling your home.
Most solar panel installation projects in Scranton take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Scranton-Wilkes-Barre metro area, and seasonal demand. Scheduling during Scranton's off-peak season (typically fall and winter) can reduce wait times and may lower costs.
Savings depend on system size, local electric rates, sun exposure, and how your utility credits the power you send back to the grid. Homes with high electric rates and strong sun exposure save the most.
None at the federal level for new systems: the federal residential clean energy credit ended for systems installed after December 31, 2025. State and utility rebates may still apply; where we track one for your city, it is listed in the rebates section on this page.