⚡ Exterior · Atlanta, GA

How Much Does It Cost to Build a Patio in Atlanta, GA?

Local pricing for the Atlanta-Sandy Springs metro area

Updated June 2026 · Local pricing for the Atlanta-Sandy Springs metro area

Low End
$1,520
Basic install
Average Cost
$3,540
Most homeowners pay this
High End
$8,090
Complex install

Get matched with Atlanta pros

Free quotes from pre-screened local contractors. No signup required.

Powered by Thumbtack

$1,950
Labor (55%)
$1,590
Materials (45%)
2–5
Days to complete

Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Atlanta's labor rates, cost of living, and material pricing.

By Matt Kovalik, Licensed Electrician — MN

How Much Does Each Part of Patio Construction Cost?

The cost to build a patio in Atlanta ranges from $1,520 to $8,090, with most homeowners paying around $3,540. Your actual cost depends on several factors specific to your home and the Atlanta-Sandy Springs market.

🔌
Square Footage

Patios are priced per square foot — larger patios cost more but have lower per-square-foot rates due to efficiency of scale.

Material (Pavers, Concrete, Flagstone)

Poured concrete is cheapest ($8–$15/sq ft), pavers cost $12–$25/sq ft, and natural flagstone runs $15–$35/sq ft installed.

📏
Base Preparation

Proper excavation, grading, and gravel base are essential for a level, durable patio. Poor base prep leads to settling and cracking.

🔧
Grading And Drainage

The patio must slope away from the house (1/4 inch per foot minimum) — regrading or adding drainage can add 10–20% to the project.

🏗️
Pattern Complexity

Simple running-bond or straight patterns are fastest. Herringbone, basket weave, and circular patterns add 20–40% more labor time.

The South generally offers lower labor costs, though fast-growing metro areas are seeing rates climb. Year-round building seasons mean more consistent pricing and availability.

Patios have a way of turning into "outdoor rooms" over time

A lot of patio projects start small. A few chairs, a grill, maybe a fire table. Then a couple years later the space has lighting, speakers, heaters, a TV, planters everywhere, and furniture that never actually gets put away anymore.

The projects that seem to age best are usually the ones where somebody thought about how people would realistically use the space after dark, during bad weather, or when guests are over. I've seen patios with expensive finishes that felt awkward because there was nowhere convenient for lighting, no shade, no good furniture layout, or no easy way to power anything without extension cords crossing the yard.

One thing I've noticed is that homeowners almost always underestimate how permanent patios become once they're finished. That's why conduit paths, lighting rough-ins, and outlet locations matter even if not everything gets installed immediately. It's much easier to think ahead before concrete and pavers lock everything into place.

No Permit Typically Required

Patio construction in Atlanta generally does not require a permit for standard installations. Check with your local building department if your project involves panel work or structural changes.

How Does Atlanta's Climate Affect Patio Construction?

Year-round construction seasons give you the most flexibility for exterior projects. Take advantage by scheduling during slower months for potentially better rates.

Can You DIY Patio Construction or Should You Hire a Pro?

🔧 Moderate DIY

Handy homeowners with basic tools can handle straightforward patio construction. If your project involves the panel, new circuits, or gas lines, hire a licensed pro. DIY can save $1,365–$1,755 in labor.

How Can You Save Money on Patio Construction in Atlanta?

Find Patio Builders in Atlanta

Compare licensed, insured contractors serving Atlanta-Sandy Springs.

Powered by Thumbtack

Common Questions About Patio Construction in Atlanta

How much does it cost to build a patio in Atlanta, GA?

The average cost to build a patio in Atlanta ranges from $1,520 to $8,090, with most homeowners paying around $3,540. This estimate includes both labor ($1,950) and materials ($1,590). Costs in Atlanta are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Atlanta contractors to lock in the best price.

Is a permit required for patio construction in Atlanta?

Atlanta does not typically require a permit for standard patio construction. However, projects involving electrical panel work, structural changes, or gas line modifications may still require one. Check with Atlanta's building department to confirm before starting work.

How long does patio construction take in Atlanta?

Most patio construction projects in Atlanta take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Atlanta-Sandy Springs metro area, and seasonal demand. Scheduling during Atlanta's off-peak season (typically winter months) can reduce wait times and may lower costs.

Which is cheaper, a patio or a deck?

Patios are typically 30–50% cheaper than decks. A poured concrete patio costs $8–$15/sq ft vs $15–$25/sq ft for a basic wood deck. Patios also require less maintenance. However, decks work better on sloped terrain or when you want an elevated outdoor space.

How long does a paver patio last?

Properly installed paver patios last 25–50+ years. Individual pavers that crack or settle can be easily replaced without redoing the entire patio. The key to longevity is proper base preparation — 4–6 inches of compacted gravel and 1 inch of leveling sand.

What Do Other Projects Cost in Atlanta?

How Much Does Patio Construction Cost in Nearby Cities?

Build a Patio in Savannah, GA — $3,280 Build a Patio in Marietta, GA — $3,500 Build a Patio in Roswell, GA — $3,600 Build a Patio in Athens, GA — $3,240 Build a Patio in Alpharetta, GA — $3,650
Published March 2025 · Updated June 04, 2026 · Cost data based on local labor rates and market conditions in the Atlanta-Sandy Springs metropolitan area.