Updated June 2026 · Local pricing for the Dallas-Fort Worth metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Fort Worth's labor rates, cost of living, and material pricing.
The cost to build a patio in Fort Worth ranges from $1,460 to $7,810, with most homeowners paying around $3,420. Your actual cost depends on several factors specific to your home and the Dallas-Fort Worth market.
Patios are priced per square foot — larger patios cost more but have lower per-square-foot rates due to efficiency of scale.
Poured concrete is cheapest ($8–$15/sq ft), pavers cost $12–$25/sq ft, and natural flagstone runs $15–$35/sq ft installed.
Proper excavation, grading, and gravel base are essential for a level, durable patio. Poor base prep leads to settling and cracking.
The patio must slope away from the house (1/4 inch per foot minimum) — regrading or adding drainage can add 10–20% to the project.
Simple running-bond or straight patterns are fastest. Herringbone, basket weave, and circular patterns add 20–40% more labor time.
The South generally offers lower labor costs, though fast-growing metro areas are seeing rates climb. Year-round building seasons mean more consistent pricing and availability.
A lot of patio projects start small. A few chairs, a grill, maybe a fire table. Then a couple years later the space has lighting, speakers, heaters, a TV, planters everywhere, and furniture that never actually gets put away anymore.
The projects that seem to age best are usually the ones where somebody thought about how people would realistically use the space after dark, during bad weather, or when guests are over. I've seen patios with expensive finishes that felt awkward because there was nowhere convenient for lighting, no shade, no good furniture layout, or no easy way to power anything without extension cords crossing the yard.
One thing I've noticed is that homeowners almost always underestimate how permanent patios become once they're finished. That's why conduit paths, lighting rough-ins, and outlet locations matter even if not everything gets installed immediately. It's much easier to think ahead before concrete and pavers lock everything into place. In warmer climates, sustained sun and heat cycling age the exposed parts faster than people expect, so in-use covers, outlet faces, and any lighting fixtures are worth specifying for that exposure from the start.
Patio construction in Fort Worth generally does not require a permit for standard installations. Check with your local building department if your project involves panel work or structural changes.
Hiring a pro? Make sure they're properly licensed — see verify general contractor licensing in Texas.
Summer heat can slow outdoor projects and increase labor costs. Schedule exterior work for spring or fall when possible. Ensure contractors have heat safety protocols in place for their crews.
Handy homeowners with basic tools can handle straightforward patio construction. If your project involves the panel, new circuits, or gas lines, hire a licensed pro. DIY can save $1,316–$1,692 in labor.
Compare licensed, insured contractors serving Dallas-Fort Worth.
Powered by Thumbtack
The average cost to build a patio in Fort Worth ranges from $1,460 to $7,810, with most homeowners paying around $3,420. This estimate includes both labor ($1,880) and materials ($1,540). Costs in Fort Worth are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Fort Worth contractors to lock in the best price.
Fort Worth does not typically require a permit for standard patio construction. However, projects involving electrical panel work, structural changes, or gas line modifications may still require one. Check with Fort Worth's building department to confirm before starting work.
Most patio construction projects in Fort Worth take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Dallas-Fort Worth metro area, and seasonal demand. Scheduling during Fort Worth's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
Patios are typically 30–50% cheaper than decks. A poured concrete patio costs $8–$15/sq ft vs $15–$25/sq ft for a basic wood deck. Patios also require less maintenance. However, decks work better on sloped terrain or when you want an elevated outdoor space.
Properly installed paver patios last 25–50+ years. Individual pavers that crack or settle can be easily replaced without redoing the entire patio. The key to longevity is proper base preparation — 4–6 inches of compacted gravel and 1 inch of leveling sand.