Updated May 2026 · Local pricing for the Phoenix-Mesa metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Phoenix's labor rates, cost of living, and material pricing.
The cost to install a fence in Phoenix ranges from $1,490 to $7,940, with most homeowners paying around $3,480. Your actual cost depends on several factors specific to your home and the Phoenix-Mesa market.
Fencing is priced per linear foot — a typical yard fence of 150–200 linear feet forms the largest portion of the cost.
Wood privacy fence runs $20–$35/ft, vinyl $25–$45/ft, chain-link $10–$20/ft, and aluminum $25–$50/ft installed.
Taller fences (6–8 ft) use more material, require deeper post holes, and cost 25–50% more than standard 4-foot fences.
Sloped, rocky, or uneven ground increases labor for digging post holes and may require stepped or racked panel installation.
Each gate adds $150–$500 depending on size and material. Double gates for vehicle access cost $400–$1,000.
The Southwest offers moderate labor costs with a growing contractor base. Rapid growth in some markets can create periods of high demand where scheduling is tight.
Budget $98–$200 for the fence permit covering fence installation in Phoenix (flat fee). Your contractor typically handles the permit process.
Residential fences use the special Table A footnote: $98 minimum on $1-$1,000 valuation, otherwise $195 base. Fences with project valuation under $1,000 include up to two inspections.
Hiring a pro? Make sure they're properly licensed — see general contractor licensing in Arizona.
Phoenix bundles all trade work (electrical, plumbing, mechanical) into a single valuation-based permit under Table A — there are NO separate per-fixture or per-circuit fee schedules. Solar PV has its own fixed-fee options ($225–$780). Phoenix has no state-mandated permit surcharge (unlike MN's 0.05%). The PDD Fee Schedule was approved 2025-12-17 by Ordinance G-7465 and is effective 2026-01-20 — the cleanest currency case among the pilot cities.
Source: City of Phoenix Planning & Development Department Fee Schedule (Ordinance G-7465), effective 2026-01-20, accessed 2026-04-27.
Summer heat can slow outdoor projects and increase labor costs. Schedule exterior work for spring or fall when possible. Ensure contractors have heat safety protocols in place for their crews.
Handy homeowners with basic tools can handle straightforward fence installation. If your project involves the panel, new circuits, or gas lines, hire a licensed pro. DIY can save $1,218–$1,566 in labor.
Compare licensed, insured contractors serving Phoenix-Mesa.
Powered by Thumbtack
The average cost to install a fence in Phoenix ranges from $1,490 to $7,940, with most homeowners paying around $3,480. This estimate includes both labor ($1,740) and materials ($1,740). Costs in Phoenix are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Phoenix contractors to lock in the best price.
Yes, Phoenix requires a fence permit for fence installation. The City of Phoenix Planning & Development Department charges $98–$200 for this permit type. Your contractor typically handles the permit application. Phoenix requires a contractor licensed by the Arizona Registrar of Contractors (AZ ROC) for this work.
Most fence installation projects in Phoenix take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Phoenix-Mesa metro area, and seasonal demand. Scheduling during Phoenix's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
Chain-link is the most affordable fencing at $10–$20 per linear foot installed. For privacy fencing, basic cedar or pressure-treated wood ($20–$30/ft) is the most cost-effective option. Vinyl and aluminum cost more upfront but require virtually no maintenance.
Most cities require a permit for fences over 4 feet tall, and some require permits for any fence. You'll also need to check setback requirements, height limits, and HOA rules. Call 811 before digging to locate underground utilities — it's free and required by law.