Updated May 2026 · Local pricing for the Phoenix-Mesa metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Phoenix's labor rates, cost of living, and material pricing.
The cost to install siding in Phoenix ranges from $5,950 to $21,820, with most homeowners paying around $11,900. Your actual cost depends on several factors specific to your home and the Phoenix-Mesa market.
Vinyl is cheapest ($4–$8/sq ft installed), fiber cement is mid-range ($8–$14/sq ft), and wood costs $8–$16/sq ft. Engineered wood offers a good balance.
More exterior wall area means more material and labor. Two-story homes have more wall area than single-story homes of the same footprint.
Removing existing siding adds $1–$3/sq ft. Some contractors install over existing siding if it's in decent condition, saving removal costs.
Adding foam insulation board under new siding ($1–$3/sq ft) improves energy efficiency and can pay for itself in energy savings.
Window trim, corner boards, soffit, and fascia work adds 20–30% to the siding project cost but is essential for a finished, weathertight result.
The Southwest offers moderate labor costs with a growing contractor base. Rapid growth in some markets can create periods of high demand where scheduling is tight.
Budget $486–$2,100 for the building permit covering siding installation in Phoenix (tiered by project value). Your contractor typically handles the permit process.
Per Ordinance G-7465 (effective 2026-01-20). Total = (Table A permit fee) + plan review (100% of permit fee for residential ≤$50K, 80% for residential >$50K, min $195). No state surcharge. Worked examples: $5,000 project ≈ $486 (or $243 if counter-review under 15 min); $10,000 project ≈ $606; $25,000 ≈ $906; $50,000 ≈ $1,406; $100,000 ≈ $2,076; $200,000 ≈ $3,695.
Hiring a pro? Make sure they're properly licensed — see verify general contractor licensing in Arizona.
Phoenix bundles all trade work (electrical, plumbing, mechanical) into a single valuation-based permit under Table A — there are NO separate per-fixture or per-circuit fee schedules. Solar PV has its own fixed-fee options ($225–$780). Phoenix has no state-mandated permit surcharge (unlike MN's 0.05%). The PDD Fee Schedule was approved 2025-12-17 by Ordinance G-7465 and is effective 2026-01-20 — the cleanest currency case among the pilot cities.
Source: City of Phoenix Planning & Development Department Fee Schedule (Ordinance G-7465), effective 2026-01-20, accessed 2026-04-27.
Summer heat can slow outdoor projects and increase labor costs. Schedule exterior work for spring or fall when possible. Ensure contractors have heat safety protocols in place for their crews.
While possible for experienced homeowners, siding installation involves significant complexity. In Phoenix, you may still need a licensed pro for permits and inspections. DIY could save $4,585–$5,895 in labor.
Compare licensed, insured contractors serving Phoenix-Mesa.
Powered by Thumbtack
The average cost to install siding in Phoenix ranges from $5,950 to $21,820, with most homeowners paying around $11,900. This estimate includes both labor ($6,550) and materials ($5,360). Costs in Phoenix are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Phoenix contractors to lock in the best price.
Yes, Phoenix requires a building permit for siding installation. The City of Phoenix Planning & Development Department charges $486–$2,100 for this permit type. Your contractor typically handles the permit application. Phoenix requires a contractor licensed by the Arizona Registrar of Contractors (AZ ROC) for this work.
Most siding installation projects in Phoenix take 5–14 days to complete. The timeline depends on project scope, contractor availability in the Phoenix-Mesa metro area, and seasonal demand. Scheduling during Phoenix's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
Vinyl siding offers the lowest installed cost ($4–$8/sq ft) and requires virtually no maintenance. Fiber cement (like James Hardie) costs more ($8–$14/sq ft) but lasts 50+ years and holds paint better. For long-term value, fiber cement is often the best investment.
Sometimes — vinyl and some other sidings can be installed over existing siding if it's flat and in reasonable condition. However, this hides potential issues like rot or moisture damage. A full tear-off and house wrap installation is recommended for the best long-term results.