Updated June 2026 · Local pricing for the Las Vegas-Henderson metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Henderson's labor rates, cost of living, and material pricing.
The cost to pour a concrete driveway in Henderson ranges from $2,500 to $8,000, with most homeowners paying around $4,500. Your actual cost depends on several factors specific to your home and the Las Vegas-Henderson market.
Driveways are priced per square foot — a standard two-car driveway (400–600 sq ft) is the biggest cost factor.
Standard residential driveways use 4-inch thick concrete. Heavy-vehicle areas need 5–6 inches, adding 25–50% more concrete.
Rebar ($0.50–$1.50/sq ft) or wire mesh prevents cracking over time. Fiber-reinforced concrete is an alternative that adds strength throughout the slab.
Removing an existing concrete or asphalt driveway adds $2–$5/sq ft for demolition, haul-off, and disposal.
Standard broom finish is cheapest. Stamped concrete adds $8–$15/sq ft for patterns and color. Exposed aggregate adds $3–$6/sq ft.
The Southwest offers moderate labor costs with a growing contractor base. Rapid growth in some markets can create periods of high demand where scheduling is tight.
Most homeowners look at a driveway and see concrete. The contractors usually see grading, drainage, base preparation, expansion joints, access limitations, cure timing, and whatever surprises are buried underneath the old slab.
The projects that hold up best long term are rarely the ones with the fanciest finish. Good drainage, proper base compaction, clean edges, and realistic expectations around cracking tend to matter more than decorative upgrades most people focus on during estimates.
I've also noticed driveway replacements often trigger other conversations once demolition starts. Garage thresholds, sidewalks, apron sections, drainage issues, buried conduit, landscape grading. Once heavy equipment is already on site, homeowners start seeing everything connected to the driveway differently. In warmer climates, the bigger concern is curing the slab slowly enough in the heat and getting the control joints spaced right, because concrete poured too hot loses moisture fast and cracks before it ever sets up right.
Budget $50–$200 for permits and inspections. Your contractor typically handles the permit process, but confirm this upfront.
Hiring a pro? Make sure they're properly licensed — see general contractor licensing in Nevada.
Summer heat can slow outdoor projects and increase labor costs. Schedule exterior work for spring or fall when possible. Ensure contractors have heat safety protocols in place for their crews.
While possible for experienced homeowners, concrete driveway installation involves significant complexity. In Henderson, you may still need a licensed pro for permits and inspections. DIY could save $1,736–$2,232 in labor.
Compare licensed, insured contractors serving Las Vegas-Henderson.
Powered by Thumbtack
The average cost to pour a concrete driveway in Henderson ranges from $2,500 to $8,000, with most homeowners paying around $4,500. This estimate includes both labor ($2,480) and materials ($2,020). Costs in Henderson are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Henderson contractors to lock in the best price.
Yes, Henderson typically requires a permit for concrete driveway installation. Budget $50–$200 for permit fees and expect 1–2 weeks for approval. Your contractor typically handles the permit application. Working without a required permit can void warranties and create problems when selling your home.
Most concrete driveway installation projects in Henderson take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Las Vegas-Henderson metro area, and seasonal demand. Scheduling during Henderson's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
A properly poured concrete driveway lasts 25–30+ years with minimal maintenance. Seal it every 2–3 years to prevent moisture damage and apply a de-icer alternative in winter (avoid rock salt, which deteriorates concrete). Cracks should be filled promptly to prevent spreading.
Concrete costs more upfront ($8–$15/sq ft vs $3–$6/sq ft for asphalt) but lasts twice as long and requires less maintenance. Asphalt needs sealing every 2–3 years and resurfacing every 15–20 years. In hot climates, concrete stays cooler and doesn't soften; in cold climates, asphalt handles freeze-thaw cycles better.