Updated June 2026 · Local pricing for the Seattle-Tacoma metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Kent's labor rates, cost of living, and material pricing.
The cost to pour a concrete driveway in Kent ranges from $2,810 to $9,000, with most homeowners paying around $5,060. Your actual cost depends on several factors specific to your home and the Seattle-Tacoma market.
Driveways are priced per square foot — a standard two-car driveway (400–600 sq ft) is the biggest cost factor.
Standard residential driveways use 4-inch thick concrete. Heavy-vehicle areas need 5–6 inches, adding 25–50% more concrete.
Rebar ($0.50–$1.50/sq ft) or wire mesh prevents cracking over time. Fiber-reinforced concrete is an alternative that adds strength throughout the slab.
Removing an existing concrete or asphalt driveway adds $2–$5/sq ft for demolition, haul-off, and disposal.
Standard broom finish is cheapest. Stamped concrete adds $8–$15/sq ft for patterns and color. Exposed aggregate adds $3–$6/sq ft.
The Pacific Northwest has moderate to high labor costs. Rain affects exterior scheduling October through April. Green building practices are common and many contractors specialize in energy-efficient work.
Most homeowners look at a driveway and see concrete. The contractors usually see grading, drainage, base preparation, expansion joints, access limitations, cure timing, and whatever surprises are buried underneath the old slab.
The projects that hold up best long term are rarely the ones with the fanciest finish. Good drainage, proper base compaction, clean edges, and realistic expectations around cracking tend to matter more than decorative upgrades most people focus on during estimates.
I've also noticed driveway replacements often trigger other conversations once demolition starts. Garage thresholds, sidewalks, apron sections, drainage issues, buried conduit, landscape grading. Once heavy equipment is already on site, homeowners start seeing everything connected to the driveway differently.
Budget $56–$222 for permits and inspections. Your contractor typically handles the permit process, but confirm this upfront.
Hiring a pro? Make sure they're properly licensed — see verify general contractor licensing in Washington.
Year-round construction seasons give you the most flexibility for exterior projects. Take advantage by scheduling during slower months for potentially better rates.
While possible for experienced homeowners, concrete driveway installation involves significant complexity. In Kent, you may still need a licensed pro for permits and inspections. DIY could save $1,945–$2,502 in labor.
Compare licensed, insured contractors serving Seattle-Tacoma.
Powered by Thumbtack
The average cost to pour a concrete driveway in Kent ranges from $2,810 to $9,000, with most homeowners paying around $5,060. This estimate includes both labor ($2,780) and materials ($2,280). Costs in Kent are higher than the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Kent contractors to lock in the best price.
Yes, Kent typically requires a permit for concrete driveway installation. Budget $56–$222 for permit fees and expect 1–2 weeks for approval. Your contractor typically handles the permit application. Working without a required permit can void warranties and create problems when selling your home.
Most concrete driveway installation projects in Kent take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Seattle-Tacoma metro area, and seasonal demand. Scheduling during Kent's off-peak season (typically winter months) can reduce wait times and may lower costs.
A properly poured concrete driveway lasts 25–30+ years with minimal maintenance. Seal it every 2–3 years to prevent moisture damage and apply a de-icer alternative in winter (avoid rock salt, which deteriorates concrete). Cracks should be filled promptly to prevent spreading.
Concrete costs more upfront ($8–$15/sq ft vs $3–$6/sq ft for asphalt) but lasts twice as long and requires less maintenance. Asphalt needs sealing every 2–3 years and resurfacing every 15–20 years. In hot climates, concrete stays cooler and doesn't soften; in cold climates, asphalt handles freeze-thaw cycles better.