Updated June 2026 · Local pricing for the Tampa-St. Petersburg metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Tampa's labor rates, cost of living, and material pricing.
The cost to remodel a kitchen in Tampa ranges from $14,870 to $59,490, with most homeowners paying around $29,740. Your actual cost depends on several factors specific to your home and the Tampa-St. Petersburg market.
A cosmetic refresh (paint, hardware, countertops) costs $10,000–$25,000 while a full gut remodel with layout changes runs $30,000–$80,000+.
Stock cabinets cost $100–$300/linear ft, semi-custom $200–$600/lf, and custom cabinets $500–$1,500/lf. Cabinets are typically the largest line item.
Laminate ($10–$40/sq ft) is cheapest, quartz ($50–$100/sq ft) is most popular, and marble ($75–$200/sq ft) is the premium choice.
Basic appliance packages start at $2,000–$4,000, mid-range runs $5,000–$10,000, and premium brands can exceed $15,000–$30,000.
Moving plumbing, electrical, and walls transforms the cost — layout changes can add $5,000–$20,000+ versus keeping the existing footprint.
The South generally offers lower labor costs, though fast-growing metro areas are seeing rates climb. Year-round building seasons mean more consistent pricing and availability.
The cabinets and countertops get all the attention, but the electrical scope underneath modern kitchens is dramatically different than what a lot of older homes were originally built around. Once the walls are open, suddenly you're talking about dedicated appliance circuits, island receptacles, lighting zones, GFCI protection, ventilation, and sometimes a panel that's already near capacity before the remodel even starts.
The projects that escalate fastest are the ones where the homeowner assumes the existing wiring can simply be "reused." Modern kitchens are power-hungry. Electric ranges commonly want a 40A or 50A circuit. Microwaves, dishwashers, disposals, beverage coolers, undercabinet lighting, and countertop appliance loads all stack together quickly. I've seen remodels where the cabinet layout was finalized before anyone checked whether the panel even had physical space left for the new circuits.
One thing that creates problems constantly is poor coordination between trades. Electricians need exact cabinet and appliance layouts early, but kitchen designs evolve constantly during remodels. Then you end up moving island outlets after countertops are templated or realizing the undercabinet lighting transformer has nowhere clean to live because the cabinet configuration changed three times during the project.
Lighting is another area where homeowners either overspend or underthink things completely. I've walked through expensive kitchen remodels with beautiful finishes and terrible lighting because everything relied on a single row of recessed cans. Good kitchens layer light properly. Task lighting under cabinets matters more in daily use than adding six extra ceiling fixtures nobody asked for.
I also see a lot of vague appliance allowances in quotes. "Electrical included" can mean almost anything on a kitchen remodel. I want to know how many new circuits are being run, whether the range circuit is included, whether island receptacles are accounted for, whether undercabinet lighting rough-in is included, and who owns patching when layouts inevitably shift during construction.
There's also a huge difference between remodeling a kitchen and building a kitchen that's easy to live with long term. Deep drawers, appliance garages, oversized islands, and decorative features all compete for the same wall and cabinet space electricians need for receptacles, switches, and lighting access. Some of the smoothest kitchen remodels I've seen were not the most expensive ones. They were the ones where the layout decisions stayed practical and the trades coordinated early instead of solving problems room-by-room after demolition already started.
Budget $152–$606 for permits and inspections. Your contractor typically handles the permit process, but confirm this upfront.
Hiring a pro? Make sure they're properly licensed — see Florida general contractor licensing requirements.
Summer is actually a great time for interior work since you're already running AC. Contractors may have more availability as exterior projects slow down in peak heat.
While possible for experienced homeowners, kitchen remodeling involves significant complexity. In Tampa, you may still need a licensed pro for permits and inspections. DIY could save $10,409–$13,383 in labor.
Compare licensed, insured contractors serving Tampa-St. Petersburg.
Powered by Thumbtack
The average cost to remodel a kitchen in Tampa ranges from $14,870 to $59,490, with most homeowners paying around $29,740. This estimate includes both labor ($14,870) and materials ($14,870). Costs in Tampa are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Tampa contractors to lock in the best price.
Yes, Tampa typically requires a permit for kitchen remodeling. Budget $152–$606 for permit fees and expect 1–2 weeks for approval. Your contractor typically handles the permit application. Working without a required permit can void warranties and create problems when selling your home.
Most kitchen remodeling projects in Tampa take 21–60 days to complete. The timeline depends on project scope, contractor availability in the Tampa-St. Petersburg metro area, and seasonal demand. Scheduling during Tampa's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
Minor kitchen remodels (cosmetic updates) return 75–80% of costs at resale. Major remodels return 50–60%. The key is to match your investment to the neighborhood — avoid over-improving for your area. A mid-range remodel often provides the best ROI.
A cosmetic refresh takes 2–4 weeks. A standard remodel with new cabinets and countertops takes 6–10 weeks. A full gut remodel with layout changes takes 10–16 weeks. Add 2–4 weeks for permits and material lead times. Plan for temporary cooking arrangements during the project.