Updated May 2026 · Local pricing for the Phoenix-Mesa metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Phoenix's labor rates, cost of living, and material pricing.
The cost to replace a bathtub in Phoenix ranges from $1,490 to $6,940, with most homeowners paying around $3,470. Your actual cost depends on several factors specific to your home and the Phoenix-Mesa market.
Standard alcove tubs cost $200–$800. Freestanding soaker tubs run $500–$3,000. Walk-in tubs with safety features cost $2,000–$10,000.
If the new tub has a different drain position, different valve configuration, or requires relocating supply lines, plumbing changes add $300–$1,500.
An acrylic surround ($300–$800 installed) is cheapest. Tile surrounds ($1,000–$3,000+) look better and last longer but cost significantly more.
Removing a cast-iron tub (300+ lbs) costs more than removing a fiberglass or acrylic tub due to weight. Some cast-iron tubs must be broken in place.
Walk-in tubs, grab bars, and ADA-compliant features add cost but are increasingly popular for aging-in-place remodels.
The Southwest offers moderate labor costs with a growing contractor base. Rapid growth in some markets can create periods of high demand where scheduling is tight.
Budget $98–$500 for the plumbing permit covering bathtub replacement in Phoenix (tiered by project value). Your contractor typically handles the permit process.
Phoenix valuation-based fee. Residential water heaters get a special $98 minimum (Table A footnote). Other plumbing work uses the standard $195 base + $12/$1,000. Trade-only permits ≤2 inspections; additional inspections $195 each.
Hiring a pro? Make sure they're properly licensed — see verify general contractor licensing in Arizona.
Phoenix bundles all trade work (electrical, plumbing, mechanical) into a single valuation-based permit under Table A — there are NO separate per-fixture or per-circuit fee schedules. Solar PV has its own fixed-fee options ($225–$780). Phoenix has no state-mandated permit surcharge (unlike MN's 0.05%). The PDD Fee Schedule was approved 2025-12-17 by Ordinance G-7465 and is effective 2026-01-20 — the cleanest currency case among the pilot cities.
Source: City of Phoenix Planning & Development Department Fee Schedule (Ordinance G-7465), effective 2026-01-20, accessed 2026-04-27.
Summer is actually a great time for interior work since you're already running AC. Contractors may have more availability as exterior projects slow down in peak heat.
While possible for experienced homeowners, bathtub replacement involves significant complexity. In Phoenix, you may still need a licensed pro for permits and inspections. DIY could save $1,337–$1,719 in labor.
Compare licensed, insured contractors serving Phoenix-Mesa.
Powered by Thumbtack
The average cost to replace a bathtub in Phoenix ranges from $1,490 to $6,940, with most homeowners paying around $3,470. This estimate includes both labor ($1,910) and materials ($1,560). Costs in Phoenix are near the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Phoenix contractors to lock in the best price.
Yes, Phoenix requires a plumbing permit for bathtub replacement. The City of Phoenix Planning & Development Department charges $98–$500 for this permit type. Your contractor typically handles the permit application. Phoenix requires a contractor licensed by the Arizona Registrar of Contractors (AZ ROC) for this work.
Most bathtub replacement projects in Phoenix take 2–5 days to complete. The timeline depends on project scope, contractor availability in the Phoenix-Mesa metro area, and seasonal demand. Scheduling during Phoenix's off-peak season (typically late fall through early spring) can reduce wait times and may lower costs.
Refinishing (reglazing) costs $300–$600 and makes an old tub look new. It's a good choice if the tub is structurally sound but cosmetically worn. Replacement is better if the tub is cracked, damaged, an inconvenient size, or if you want to change the tub type (e.g., standard to walk-in).
Yes — tub-to-shower conversions cost $3,000–$10,000 depending on size, tile work, and fixtures. This is a popular remodel that adds accessibility and modern appeal. Keep in mind that removing the home's only bathtub can reduce resale value, especially for families with young children.