Updated June 2026 · Local pricing for the Minneapolis-St. Paul metro area
Free quotes from pre-screened local contractors. No signup required.
Powered by Thumbtack
Prices estimated using the NailThePrice Local Cost Model™ — national averages adjusted for Minneapolis's labor rates, cost of living, and material pricing.
The cost to install skylights in Minneapolis ranges from $1,050 to $4,220, with most homeowners paying around $2,320. Your actual cost depends on several factors specific to your home and the Minneapolis-St. Paul market.
Fixed skylights are cheapest ($200–$600), vented models that open for airflow cost $400–$1,200, and tubular skylights for small spaces cost $200–$500.
Skylights on low-pitch roofs need extra flashing care to prevent water pooling. Very steep roofs require more complex installation and safety measures.
A proper step-and-counter flashing kit is critical for waterproofing — quality kits from the skylight manufacturer cost $50–$150 and are essential for a leak-free install.
If the roof and ceiling aren't the same plane, a light shaft must be framed and drywalled to connect them, adding $500–$1,500 per skylight.
Multiple skylights reduce per-unit installation cost since the roofer is already set up, but each still requires its own shaft, flashing, and finishing.
The Midwest has a strong pool of skilled tradespeople, and labor rates tend to be moderate compared to coastal cities. Union and non-union shops both compete, giving homeowners options on pricing.
A good skylight changes a room immediately. More natural light, better airflow, spaces that actually feel open during the day. A bad skylight usually turns into a long-term stain on the ceiling that homeowners slowly stop looking at.
What I notice most on skylight projects is how much the surrounding roof work matters. Flashing details, roof pitch, attic ventilation, and placement tend to matter more long term than the skylight brand itself. The projects that age badly are usually the ones where the skylight got treated like a simple cut-and-drop installation instead of a roof penetration that has to survive weather for decades.
I also see more homeowners adding powered shades, solar venting skylights, and smart controls now, especially in high-ceiling rooms where manual operation becomes impractical pretty quickly. Those upgrades work best when someone thought through access and wiring paths early instead of trying to retrofit everything after the drywall and trim are already finished. In colder climates, condensation and ice tend to collect around the curb and flashing, and the repeated thermal movement is worth accounting for so the seal stays tight through years of freeze-thaw.
Budget $280–$2,500 for the building permit covering skylight installation in Minneapolis (tiered by project value). Your contractor typically handles the permit process.
Total = (tiered fee on construction value, Title 5 Ch 91) + 65% plan review fee + 0.05% MN state surcharge. Worked examples across the spread: $1,500 project (single skylight cut) ≈ $136; $2,500 project (door cut, egress window) ≈ $190; $5,000 project (small deck, small bath) ≈ $276; $10,000 project ≈ $449; $25,000 project ≈ $966; $50,000 project (mid kitchen / basement) ≈ $1,593; $75,000 project ≈ $2,043; $100,000 project (large kitchen / addition) ≈ $2,493. Range reflects the dominant residential-remodel project mix; the smallest building-permitted projects (single skylight, single-door cut, single egress window) may pay $135–$200, below the headline floor.
Hiring a pro? Make sure they're properly licensed — see roofer licensing in Minnesota.
Electrical permits are issued by the Minnesota Department of Labor and Industry, not the City of Minneapolis (verified via the city's Permit Types page). Pool permits are issued by the city under Title 5 Chapter 89, with fees calculated using the standard building valuation tier. Frost-line plumbing and structural design are subject to Minnesota State Building Code; verify with CPED before construction.
Source: City of Minneapolis Building Permit Fee Schedule and Worksheet, accessed 2026-04-27.
Ice dam prevention and proper ventilation are essential. Consider ice-and-water shield membrane on eaves. Roofing season is shorter, so summer bookings fill fast — plan ahead for spring starts.
While possible for experienced homeowners, skylight installation involves significant complexity. In Minneapolis, you may still need a licensed pro for permits and inspections. DIY could save $972–$1,251 in labor.
Compare licensed, insured contractors serving Minneapolis-St. Paul.
Powered by Thumbtack
The average cost to install skylights in Minneapolis ranges from $1,050 to $4,220, with most homeowners paying around $2,320. This estimate includes both labor ($1,390) and materials ($930). Costs in Minneapolis are higher than the national average due to local cost of living and labor market conditions. Get multiple quotes from licensed Minneapolis contractors to lock in the best price.
Yes, Minneapolis requires a building permit for skylight installation. The City of Minneapolis Development Review (CPED) — Construction Code Services charges $280–$2,500 for this permit type, with an inspection turnaround of 5–15 business days. Your contractor typically handles the permit application. Minneapolis requires a contractor licensed by the Minnesota Department of Labor and Industry for this work. This project also typically requires roofing sub-permits — combined sub-permit fees in Minneapolis run $170–$700.
Most skylight installation projects in Minneapolis take 1–2 days to complete. The timeline depends on project scope, contractor availability in the Minneapolis-St. Paul metro area, and seasonal demand. Scheduling during Minneapolis's off-peak season (typically fall and winter) can reduce wait times and may lower costs.
Modern skylights with proper flashing and installation rarely leak. Most skylight leaks come from improper installation or deteriorated flashing, not the skylight itself. Using a certified installer and the manufacturer's flashing kit virtually eliminates leak risk. Quality skylights carry 10–20 year warranties.
Skylights reduce the need for electric lighting during the day, but they can also add heat gain in summer and heat loss in winter. Choose ENERGY STAR-rated skylights with Low-E glass. Vented skylights also provide natural ventilation, reducing AC needs.